|
|
|
|
|
|
Simpson Strong-Tie LUS Series LUS28-3 Joist Hanger, 6-1/4 in H, 4-5/8 in W, Steel, Galvanized
|
|
|
All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie LUS Series LUS28-3Z Joist Hanger, 6-1/4 in H, 2 in D, 4-5/8 in W, 2 x 8 in, Steel, ZMAX, Face
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie SUR210 Hanger, 8-3/16 in H, 2 in D, 1-9/16 in W, Steel, Galvanized, Face Mounting
|
|
|
The SU Series of hangers are skewed 45 deg left or right. Angled nail slots direct nails for proper installation.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie SUL210 Hanger, 8-1/8 in H, 2 in D, 1-9/16 in W, Steel, Galvanized, Face Mounting
|
|
|
Simpson Strong-Tie Hanger, Skew Angle: 45 deg, Fastener Type: Nails, Steel, Galvanized, Face Mounting, 8-1/8 in H, 1-9/16 in W, 2 in D
|
|
|
|
|
|
|
|
|
|
JOIST HANGER HEAVY ZMAX 4X6IN - Case of 2
|
|
|
APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw.
|
|
|
|
|
|
|
|
|
|
HNGR JOIST DBL 2X8IN 18GA GALV - Case of 25
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
HANGER JOIST 18GA 2X6IN - Case of 25
|
|
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
|
|
|
|
|
|
|
|
|
JOIST HANGER ZMAX 18GA 2X6IN - Case of 25
|
|
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
|
|
|
|
|
|
|
|
|
HNGR JOIST 2X10IN 22GA GALV - Case of 50
|
|
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
|
|
|
|
|
|
|
|
|
U-HANGER DBL SHR GALV 16GA 2X6 - Case of 25
|
|
|
The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
