|
|
|
|
|
|
Prime-Line B 544 Edge Roller Assembly, 9/16 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Flat Roller, 5/8 in W
|
|
|
This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring loaded 9/16 in Dia flat edged high density polyethylene roller inside. It fits into a rectangle slot in the bottom of the door and is held in by the included screw.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 541 Spring Tension Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Concave Roller
|
|
|
This Arcadia style roller assembly was used by Arcadia doors as well as many other patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in high density polyethylene roller and fits onto the B 569 corner insert. It is often used on the top as well as the bottom of the sliding screen door.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 530 Adjustable Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Concave Roller
|
|
|
This sliding screen door roller assembly insert has an aluminum frame with a high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door with the included screws. The roller housing adjusts up and down to the correct position needed. This style is often on Columbia sliding screen doors but is also used by very many other screen door manufacturers. Please note dimensions and design when comparing with old roller.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 522 Center Grooved Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller, Steel
|
|
|
This center grooved sliding screen door tension roller is used by many patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 in steel ball bearing roller. The tension spring 2-1/2 in L and is a heat-treated high tension steel spring.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 704 Flat Spring Tension Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller
|
|
|
This high tension steel spring roller assembly fits onto the Columbia Uni-Fit Series door. This roller assembly has a 1 in steel ball bearing roller mounted in the housing. The end of the flat steel spring inserts into a slot within the screen door frame while the flat tabs extending in front of the roller restrict the roller from retracting too far into the door frame as it rolls.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 610 Spring Tension Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller, 2 in L
|
|
|
This Arcadia style roller assembly is used by Arcadia doors as well as many other patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in steel ball bearing roller and fits onto the B 569 corner insert. It is often used on the top as well as the bottom of the sliding screen door.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 543 Roller Assembly, 11/16 in Dia Roller, Polyethylene Roller, Convex Roller, 5/8 in W, 2-3/8 in H, Nylon
|
|
|
This sliding screen door top roller guide was used on HiLite Doors. The high density polyethylene body installs into the top of the screen door frame and is held in place by the included screw. The guide roller is a 11/16 in oval ball bearing high density polyethylene roller.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 617 Adjustable Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller, 3/8 in W
|
|
|
This sliding screen door roller assembly insert has an aluminum frame with a high density polyethylene inner housing and steel ball bearing roller. The assembly inserts into the bottom or top of the sliding screen door with the included screws. The roller housing adjusts up and down to the correct position needed. This style is often on Columbia sliding screen doors but is also used by very many other screen door manufacturers. Please note dimensions and design when comparing with old roller.
|
|
|
|
|
|
|
|
|
|
Prime-Line B702 Sliding Screen Door Roller, 1 in Dia Roller, 1/4 in W Roller, Steel
|
|
|
This steel housing and spring-loaded arm with the 1 in steel ball bearing roller attached is used by Bay-Mills as well as several patio door manufacturers. The roller arm is spring-loaded and adjusted by the adjustment sleeve and screw on top.
|
|
|
|
