|
|
|
|
|
|
Shepherd Hardware Wedge It 9435 Shim, 2 in L, 1-1/8 in W, Plastic, White
|
|
|
Use with construction, plumbing, wood cabinets, furniture or for bracing items that tilt, move or are loose. Tapers from 3/16 to 1/16 in. Carded.
|
|
|
|
|
|
|
|
|
|
ProSource FE-S717-PS Shim, 1-7/8 in L, 1-3/32 in W, 7/32 in Thick, Plastic, White
|
|
|
Plastic shim is ideal for leveling cabinets, furniture or appliances on uneven floors or surfaces. Textured, non-marring plastic.
|
|
|
|
|
|
|
|
|
|
Oatey 14205 Rain Collar, 1-1/4 to 1-1/2 in Vent Hole, Rubber
|
|
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
Oatey 14206 Rain Collar, 2 in Vent Hole, Rubber
|
|
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
Oatey 14207 Rain Collar, 3 in Vent Hole, Rubber
|
|
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
Oatey 14208 Rain Collar, 4 in Vent Hole, Rubber
|
|
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
Hercules No-Calk Series 11889 Roof Flashing, 18 in OAL, 18 in OAW, Thermoplastic
|
|
|
Oatey? thermoplastic No-Calk? roof flashings with 18 in x 18 in bases are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
Oatey No-Calk Series 48100 Roof Flashing, 16 in OAL, 14 in OAW, 1-1/4 to 1-1/2 in Pipe, Thermoplastic
|
|
|
Oatey?? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
Amerimax 8505011 Snow Guard, 3-1/2 in W, Polycarbonate, Clear, Surface Installation
|
|
|
Clear snow guards are manufactured in a high clarity polycarbonate plastic with UV stabilizers which provide strength and longevity. The structural rib guard is designed to fit over stiffening rib on residential panels. The surface mount are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seam mounted device can be fastened, including batten and cap seam panels. Both have a low visibility and blend with roof materials and can be attached with adhesives, screws or a combination of both.
|
|
|
|
|
|
|
|
|
|
Nelson WC8/32/15/50 Shim, 8 in L, 1-1/2 in W, Composite
|
|
|
Designed for easy snapping and faster installations. NWS Composite shims are waterproof, resist splitting, impervious to insects and offer much greater load bearing capacity than wood. Composite Shims are 8 in long and tapered from 5/16 in down to 1/32 in. There are 32 shims per carton, 15 cartons per box and 50 boxes per pallet. Shims fit easily into a tool belt.
|
|
|
|
