|
|
|
|
|
|
Eaton Wiring Devices S1174W Lamp Holder, 250 V, 660 W, Plastic Housing Material, White
|
|
|
Keyless Plastic ceiling lamp holders are molded of high-temperature, thermoset plastic to reduce breakage. Mounts on 4 in (101.6 mm) outlet boxes with breakout for 3-1/4 in (82.5 5 mm) box mounting. Leads are 6 in (152.4 mm) 105 deg C insulated stranded #16, stripped 3/4 in (19.05 mm). Pull chain devices include ball chain, 3 ft (0.91 m) of cord, connector and endbell. Top wire versions have terminal screws backed out - ready for wiring - without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece units.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP850V Night Light, 15 A, 125 V, 4 W, Incandescent Lamp, Ivory Light, Plastic Fixture
|
|
|
Night lights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP850W Night Light, 15 A, 125 V, 4 W, Incandescent Lamp, White Light, Plastic Fixture
|
|
|
Night lights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.
|
|
|
|
|
|
|
|
|
|
LMPHLDR 660W 250V WHT
|
|
|
Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts.
|
|
|
|
|
|
|
|
|
|
LAMPHOLDR PORC WHT 660W 250V
|
|
|
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
|
|
|
|
|
|
|
|
|
|
LAMPHOLDER PORC WHT 250W 250V
|
|
|
Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
|
|
|
|
|
|
|
|
|
|
TRIM OPEN RECES NON-IC 6IN WHT
|
|
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
|
|
|
|
|
|
|
|
|
Halo 401P Recessed Light Trim, Metal Body, White
|
|
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP851BGE Night Light, 15 A, 125 V, 4 W, Incandescent Lamp, Beige Light, Plastic Fixture
|
|
|
Automatic nightlights photo sensor automatically lights -on at dusk, off at dawn. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP851W Night Light, 15 A, 125 V, 4 W, Incandescent Lamp, White Light, Plastic Fixture
|
|
|
Automatic nightlights photo sensor automatically lights -on at dusk, off at dawn. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic.
|
|
|
|
