|
|
|
|
|
|
CAMCO 07133 Bilingual Gasket Kit
|
|
|
Everything needed to install flat, screw-in and universal flange elements. Contains one screw-in gasket, one universal flange gasket, one four hole gasket and four 1/4-20 x 3/4 in hex bolts.
|
|
|
|
|
|
|
|
|
|
CAMCO 11061 Flare Dip Tube with Gasket, PEX
|
|
|
The CAMCO flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length.
|
|
|
|
|
|
|
|
|
|
GSW 322557-000 Element Gasket, Gray
|
|
|
GSW Element Gasket, Specifications: Square Flanged, Gray
|
|
|
|
|
|
|
|
|
|
CAMCO 10862 Bilingual Run-Off Tube, Thermoplastic Polypropylene
|
|
|
The CAMCO side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
|
|
|
|
|
|
|
|
|
|
B & K 168-003NL Pipe Union, 1/2 in, FIP x Sweat, Brass, 250 psi Pressure
|
|
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
B & K 168-004NL Pipe Union, 3/4 in, FIP x Sweat, Brass, 250 psi Pressure
|
|
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
CAMCO 11523 Water Heater Drain Valve, Plastic
|
|
|
CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.
|
|
|
|
|
|
|
|
|
|
EZ-FLO WaterFlex Series 0437012 Corrugated Flexible Water Heater Connector, 3/4 in, FIP, Stainless Steel, 12 in L
|
|
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
|
|
|
|
|
|
|
|
|
GSW 100265848/81988SP Heater Drain Valve, Plastic, White
|
|
|
GSW Heater Drain Valve, Plastic, White
|
|
|
|
|
|
|
|
|
|
CAMCO 10623 Dielectric Nipple, 3/4 in, NPT, Plastic, 2-1/2 in L
|
|
|
The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack.
|
|
|
|
