|
|
|
|
|
|
Simmons 1358 Cable Guard
|
|
|
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4 to 6 in casing. Easy to use, snap-in wire guide. With split circle wire hole.
|
|
|
|
|
|
|
|
|
|
Boshart HS2 Heat Shrink Splice Kit, Polyolefin, Black, For: #14, #12, #10 Lead Wires of Submersible Pump Motor
|
|
|
HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered.
|
|
|
|
|
|
|
|
|
|
Boshart HS-3-4 Heat Shrink Splice Kit, Polyolefin, Black, For: #14, #12, #10 Lead Wires of Submersible Pump Motor
|
|
|
HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered.
|
|
|
|
|
|
|
|
|
|
Boshart HS Series PE-HS3 Heat Shrink Splice Kit, Polyolefin, Black
|
|
|
HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered.
|
|
|
|
|
|
|
|
|
|
Simmons 1371 Splicing Kit, For: #3 and 10 ga, 12 ga, 14 ga Submersible Cable
|
|
|
Wire sizes 3-wire 10-12-14. Sleeve size 3/8 in x 3 in.
|
|
|
|
|
|
|
|
|
|
Simmons 1235 Splicing Kit, Plastic, For: #3 and 10 ga, 12 ga, 14 ga Submersible Cable
|
|
|
Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable.
|
|
|
|
|
|
|
|
|
|
Simmons 1350 Torque Arrestor, Rubber, For: 1 or 1-1/4 in Drop Pipe and 4 to 8 in Well Casing
|
|
|
Fits 1 in or 1-1/4 in drop pipe, 4 in to 8 in well casing. Supplied with two stainless steel clamps.
|
|
|
|
|
|
|
|
|
|
Boshart PE-TA Torque Arrestor, Black, For: 4 to 8 in Casing Pump
|
|
|
Boshart Torque Arrestor, Black, Suitable for: 4 to 8 in Casing Pump
|
|
|
|
|
|
|
|
|
|
Boshart PENL-BFAU10-P07 Pipe Adapter, 1 x 3/4 in, FPT x PEX, Brass
|
|
|
Boshart Pipe Adapter, Nominal Size: 1 x 3/4 in, FPT x PEX Connection, Brass
|
|
|
|
|
|
|
|
|
|
Simmons 9486 Rope Adapter, 1 in, Bronze
|
|
|
1 in insert rope adapter.
|
|
|
|
