|
|
|
|
|
|
Irwin 15070 Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge, Applicable Materials: Wood
|
|
|
Construction carbide teeth for longer life. Face ground carbide teeth for fast, clean cuts. Fully hardened plate runs truer longer. Reinforced shoulder for added durability.
|
|
|
|
|
|
|
|
|
|
Irwin 15270 Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge, Applicable Materials: Wood
|
|
|
Thin kerf saw blade for circular saws. Alternate top bevel, 2.7 mm kerf, 13 deg hook angle.
|
|
|
|
|
|
|
|
|
|
Vulcan 415641OR Circular Saw Blade, 10 in Dia, 5/8 in Arbor
|
|
|
Made of carbide steel. 28T.
|
|
|
|
|
|
|
|
|
|
Milwaukee 48-40-1024 Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge
|
|
|
Milwaukee? circular saw blades provide longer life, increased accuracy and cooler cuts in wood cutting applications. The blades are designed utilizing application-specific cobalt infused tungsten carbide to extend cutting life and maintain tip sharpness. The blades feature laser cut vibration slots to reduce wobble and warping. With an anti-friction coating the blades resist corrosion and gumming. Milwaukee's circular saw blades are optimized for cordless and corded performance.
|
|
|
|
|
|
|
|
|
|
Diablo D1024X Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
|
|
|
Diablo blade cuts rough framing lumber, high-quality finish lumber, plywood, OSB and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and frames more houses than other framing blades. Ideal for general construction applications, including fast, efficient ripping and crosscutting.
|
|
|
|
|
|
|
|
|
|
Vulcan 415721OR Circular Saw Blade, 10 in Dia, 5/8 in Arbor
|
|
|
Made of carbide steel. 40T.
|
|
|
|
|
|
|
|
|
|
Irwin Marathon 14233 Table Saw Blade, 10 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
|
|
|
Thin kerf saw blade for miter saws and table saws. No. 400 grit diamond ground teeth. Alternate top bevel, 1.6 mm plate, 0.095 in kerf, 20 deg hook angle, 5900 max rpm.
|
|
|
|
|
|
|
|
|
|
Irwin Marathon 14070 Table Saw Blade, 10 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge
|
|
|
Construction-grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade.
|
|
|
|
|
|
|
|
|
|
Diablo D1050X Circular Saw Blade, 10 in Dia, 5/8 in Arbor, 50-Teeth, Carbide Cutting Edge
|
|
|
Diablo combination blade is ideal for ripping and crosscutting wood and wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.
|
|
|
|
|
|
|
|
|
|
Framing/ripping Arbor - Case of 5
|
|
|
#400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade for an accurate cut. Construction-grade carbide teeth for longer life. Thin kerf for fast cuts.
|
|
|
|
